 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Side-on PMT Photosensor Modules H8249 Series The H8249 series photosensor modules incorporate a 28-mm (1-1/8") diameter side-on photomultiplier tube, a high-voltage power supply circuit and a low noise amplifier. Two types of amplifiers are available with a current-tovoltage conversion coefficient of 1 V/A or 0.1 V/A and a frequency bandwidth of DC to 20 kHz or DC to 200 kHz. Three types of photomultiplier tubes are provided as standard lineups for general applications in the visible range, UV to visible range requiring low-noise, and UV to near IR range. Product Variations Type No. Spectral Response Current-to-Voltage Frequency Bandwidth Features Conversion Factor For general applications in visible range H8249-001 300 nm to 650 nm For general applications in UV to visible range H8249-011 185 nm to 680 nm 1 V/A DC to 20 kHz High sensitivity in UV to near IR range. Uses photomultiplier H8249-101 185 nm to 900 nm tube with meshless grid for excellent uniformity. For general applications in visible range H8249-002 300 nm to 650 nm For general applications in UV to visible range H8249-012 185 nm to 680 nm 0.1 V/A DC to 200 kHz High sensitivity in UV to near IR range. Uses photomultiplier H8249-102 185 nm to 900 nm tube with meshless grid for excellent uniformity. Specifications Parameter Suffix Input Voltage Max. Input Voltage Max. Input Current Max. Control Voltage Recommended Control Voltage Adjustment Range Effective Area Sensitivity Adjustment Range Peak Sensitivity Wavelength Min. Luminous Sensitivity Typ. Blue Sensitivity Index (CS 5-58) Red/White Ratio Radiant Sensitivity *1 Suffix (with internal 20 kHz amp) Min. Luminous Sensitivity *2 Typ. Radiant Sensitivity *1 *2 Voltage Output Depending Typ. on PMT Dark Current *2 *3 Max. Max. Output Signal Voltage Current-to-Voltage Conversion Factor Suffix (with internal 200 kHz amp) Min. Luminous Sensitivity *2 Typ. Radiant Sensitivity *1 *2 Voltage Output Depending Typ. on PMT Dark Current *2 *3 Max. Max. Output Signal Voltage Current-to-Voltage Conversion Factor Cathode Anode Anode -001 / -002 30 60 7.1 -- 60 -001 5.0 x 107 6.0 x 108 600 5 50 -002 5.0 x 106 6.0 x 107 60 0.5 5 Offset Voltage *2 Typ. Ripple Noise *2 *4 (peak to peak) Max. Settling Time *5 Operating Ambient Temperature Storage Temperature Weight H8249 Series -011 / -012 11.5 to 15.5 18 +50/-1 +1.2 (Input Impedance 100 k) +0.3 to +1.1 4 x 20 1: 104 400 40 60 6.4 -- 60 -011 2.0 x 108 4.0 x 108 400 0.1 2 +10 (Load resistance 10 k) 1 -012 2.0 x 107 4.0 x 107 40 0.01 0.2 +10 (Load resistance 10 k) 0.1 H8249 series 3 4 0.2 +5 to +45 -20 to +50 Approx. 220 -101 / -102 Unit -- V V mA V V mm -- nm A/lm -- -- mA/W V/lm V/nW mV V V/A 140 250 8.0 0.3 74 -101 4.0 x 108 2.5 x 109 740 3 50 -102 4.0 x 107 2.5 x 108 74 0.3 5 V/lm V/nW mV V V/A mV mV s C C g *1: Measured at the peak sensitivity wavelength *2: Control voltage = +1.0 V *3: After 30 minute storage in darkness *4: Cable RG-174/U, Cable length 450 mm, Load resistance = 1 M, Load capacitance = 22 pF *5: The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. 32 Voltage Output Type Photosensor Modules Characteristics (Anode radiant sensitivity, PMT gain) H8249-001 -011 10 -101 TPMOB0155EA PMT GAIN: 105 1 -101 -102 H8249-002 -012 -102 108 TPMOB0158EA ANODE RADIANT SENSITIVITY (V/nW) ANODE RADIANT SENSITIVITY (V/nW) 107 -101 -102 106 -001 -002 -011 -012 1 0.1 PMT GAIN 105 -001 -002 0.1 0.01 104 -011 -012 103 0.01 100 200 300 400 500 600 700 800 0.001 900 102 0.25 0.3 0.4 0.5 0.7 1.0 1.2 1.5 2.0 WAVELENGTH (nm) CONTROL VOLTAGE (V) Sensitivity Adjustment Method VOLTAGE PROGRAMMING PHOTOSENSOR MODULE COAXIAL CABLE RED (LOW VOLTAGE INPUT) GREEN (LOW VOLTAGE INPUT) BLACK (GND) BLUE (Vref OUTPUT) WHITE (Vcontrol INPUT) POWER SUPPLY SIGNAL OUTPUT RESISTANCE PROGRAMMING PHOTOSENSOR MODULE COAXIAL CABLE RED (LOW VOLTAGE INPUT) GREEN (LOW VOLTAGE INPUT) BLACK (GND) BLUE (Vref OUTPUT) WHITE (Vcontrol INPUT) CW POWER SUPPLY SIGNAL OUTPUT +15 V -15 V GND +15 V -15 V GND * Adjust the control voltage to adjust the sensitivity. * Electrically insulate the reference voltage output. +0.3 V to +1.1 V GND MONITOR POTENTIOMETER (10 k) When using a potentiometer, adjust sensitivity while monitoring the control voltage. TPMOC0162ED Dimensional Outlines (Unit: mm) 5.0 0.5 38.0 0.5 27.0 0.5 EFFECTIVE AREA (4 x 20) 50.0 0.5 10.0 0.5 POWER INPUT HIROSE HR10A-7R-6P 2.5 -0 +1.0 1.5 -0 +0.5 WINDOW 19.0 0.5 24.0 +0.5 -0 95.0 1.0 85.0 0.5 87.0 0.5 1: GND 2: Vcc +15 V 3: Vcont +0.3 V to +1.1 V 4: Vref 5: GND 6: Vee -15 V 55.0 0.5 23.0 0.8 55.0 0.5 8.0 +0.5 -0 34.0 0.8 17.2 0.5 4.5 0.3 8 WINDOW TOP VIEW 4-M3 DEPTH: 10 FRONT VIEW R3 C1 2 x 2-M3 DEPTH: 10 SIDE VIEW SIGNAL OUTPUT BNC-R REAR VIEW PHOTOCATHODE FRONT VIEW TPMOC0123EC Power cable with connector (HIROSE HR10A-7P-6S) is supplied with the H8249 series BLACK: RED: WHITE: BLUE: GREEN: GND LOW VOLTAGE INPUT (+15 V) Vcont INPUT (+0.3 V to +1.1 V) Vref OUTPUT (+1.2 V) LOW VOLTAGE INPUT (-15 V) TPMOA0022EB 700 20 20 -0 EFFECTVE AREA (4 x 20) +2 33 |
Price & Availability of H8249-102
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |